Numerical modeling of temperature distribution in a high temperature sintering furnace

Basit Öğe Kaydı
dc.contributor.authorAkkoyunlu, Türker
dc.contributor.authorUzun, İbrahim
dc.contributor.authorTan, Hüsamettin
dc.date.accessioned2025-01-21T16:34:14Z
dc.date.available2025-01-21T16:34:14Z
dc.date.issued2024
dc.departmentKırıkkale Üniversitesi
dc.description.abstractThe development of new energy management systems for sintering processes with high energy consumption and generally carried out with traditional recipes has become an important research topic nowadays. It has been focused on homogeneous temperature distribution in the furnace used in the sintering process. If the temperature difference is high in the furnace, the internal structure of the materials can show serious changes. In this study, transient numerical design and analysis were carried out from room temperature to 1100 degrees C. The temperature changes of the samples placed at different locations in the furnace with the dimensions of 1070x1580x1030 mm were numerically investigated as transiently. In numerical studies, room temperature and initial furnace temperature were defined as the initial conditions. The boundary conditions are given as heat flux on the heater surfaces and convection outside the furnace. At the end of numerical solutions, temperature values were found inside the furnace and on the samples transiently. I t was showed that the temperature differences between the samples were high that is expected at the beginning, but these differences decreased to about 17 degrees C in the steady conditions. Unlike the studies in the literature, the condition of the samples in a protected chamber, not under the influence of direct radiation, was examined and it was observed that the temperature differences decreased by up to 2 degrees C. In the analysis, time-dependent temperature distributions and temperature differences are given comparatively for two different cases.
dc.identifier.doi10.5505/pajes.2023.61282
dc.identifier.endpage601
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue5
dc.identifier.startpage595
dc.identifier.trdizinid1283322
dc.identifier.urihttps://doi.org/10.5505/pajes.2023.61282
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay1283322
dc.identifier.urihttps://hdl.handle.net/20.500.12587/23918
dc.identifier.volume30
dc.identifier.wosWOS:001339927200001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.publisherPamukkale Univ
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectS2S radiation; CFD; Sintering furnace; Unsteady thermal analysis
dc.titleNumerical modeling of temperature distribution in a high temperature sintering furnace
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Tam Metin/Full Text
Boyut:
666.07 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu