The Effect of Solid Boriding Time on the Structure, Hardness and Corrosion Properties of AISI 5140 Steel

dc.contributor.authorBayca, S. U.
dc.contributor.authorBican, O.
dc.contributor.authorYamanel, B.
dc.contributor.authorHekimoglu, A. P.
dc.contributor.authorCalis, M.
dc.date.accessioned2021-01-14T18:10:38Z
dc.date.available2021-01-14T18:10:38Z
dc.date.issued2020
dc.departmentKKÜ
dc.description.abstractIn this study, AISI 5140 steel samples were borided in an electrical furnace at a temperature of 950 degrees C for 4, 6 and 8 h. Structural examinations, hardness measurement and corrosion tests were performed to determine the effect of the boriding time on the microstructure, hardness and corrosion resistance of the steel surface. It was observed that 4 h of boriding treatment resulted in the forming of Fe2B layer on the surface of the AISI 5140 steel. However, when the boriding time exceeded 4 h, FeB phase formed on the surface layer of the steel in addition to the Fe2B phase. It was also observed that both the thickness and hardness of the boride layer increased with the increasing boriding time. The hardness values of the borided sample surface were approximately seven times greater than unborided AISI 5140 steel. The samples subjected to boriding for 4 h showed higher corrosion resistance than the unboriding steel samples. But boriding time of more than 4 h caused a decrease in the corrosion resistance of the AISI 5140 steel.en_US
dc.description.sponsorshipScientific Research Project Unit of Krkkale University [2017/079]en_US
dc.description.sponsorshipThis study was supported by project code number 2017/079 by the Scientific Research Project Unit of Krkkale University. We would like to thank the Scientific Research Project unit for supporting this project.en_US
dc.identifier.citationBu makale açık erişimli değildir.en_US
dc.identifier.doi10.1134/S2070205120030065
dc.identifier.endpage597en_US
dc.identifier.issn2070-2051
dc.identifier.issn2070-206X
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85088888865
dc.identifier.scopusqualityQ3
dc.identifier.startpage591en_US
dc.identifier.urihttps://doi.org/10.1134/S2070205120030065
dc.identifier.urihttps://hdl.handle.net/20.500.12587/12707
dc.identifier.volume56en_US
dc.identifier.wosWOS:000556021800018
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherMAIK NAUKA/INTERPERIODICA/SPRINGERen_US
dc.relation.ispartofPROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI 5140 steelen_US
dc.subjectboridingen_US
dc.subjecthardnessen_US
dc.subjectcorrosionen_US
dc.subjectbaybora-1en_US
dc.titleThe Effect of Solid Boriding Time on the Structure, Hardness and Corrosion Properties of AISI 5140 Steelen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
The Effect of Solid Boriding Time on the Structure, Hardness and Corrosion Properties of AISI 5140 Steel.pdf
Boyut:
2.29 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text