MECHANICAL PROPERTIES RESEARCH OF CARBON FIBRE COMPOSITES INCORPORATING NANOCLAY AND GRAPHENE

Basit Öğe Kaydı
dc.contributor.authorOngun, Alemdar
dc.date.accessioned2025-01-21T16:42:32Z
dc.date.available2025-01-21T16:42:32Z
dc.date.issued2023
dc.departmentKırıkkale Üniversitesi
dc.description.abstractStudy purpose is to determine the interactions between the widely-used graphene and nanoclay on carbon fiber composite materials. They are produced using the vacuum infusion method by reinforcing the nanoclay and graphene, which have a montmorillonite structure organized at various ratios via homogenizer, into the resin that is to be applied to carbon fiber layers. Eczacibasi EsanNANO 1-140 was used as nanoclay, and GRAFEN NG5 of the Nanografi Co. Ltd. was used as graphene. The graphene ratio was kept constant by taking reference from antecedent studies. Tensile test was applied to the produced samples. Graphene in the resin is expected to increase the saturation in the layers and improve mechanical properties. After nanoclay ratio exceeds a certain limit, it acts negatively rather than positively in the tensile test, their cracked roads are then rendered easier to traverse by them combining. This is why there is a certain bell-shaped curve in the strain values measured in samples. The result that gives the optimum values is sought after. Additionally, there are studies previously conducted with polymer matrix composite, from which samples that could reach to certain strains or to higher yield stress values in certain intervals are obtained. By increasing the strength and toughness of the graphene and nanoclay resin, they gain more rigidity, which raises an expectation of increment to be observed in the yield and tensile strengths.
dc.identifier.doi10.2298/TSCI2304291O
dc.identifier.endpage3297
dc.identifier.issn0354-9836
dc.identifier.issn2334-7163
dc.identifier.issue4B
dc.identifier.scopus2-s2.0-85172384949
dc.identifier.scopusqualityQ3
dc.identifier.startpage3291
dc.identifier.urihttps://doi.org/10.2298/TSCI2304291O
dc.identifier.urihttps://hdl.handle.net/20.500.12587/25093
dc.identifier.volume27
dc.identifier.wosWOS:001108597100026
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherVinca Inst Nuclear Sci
dc.relation.ispartofThermal Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectgraphene; nanoclay; carbon fiber; low velocity impact test; tensile test
dc.titleMECHANICAL PROPERTIES RESEARCH OF CARBON FIBRE COMPOSITES INCORPORATING NANOCLAY AND GRAPHENE
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu