Investigation of machinability in Al-MgO composites produced by melt-stirring

Basit Öğe Kaydı
dc.contributor.authorPul, Muharrem
dc.contributor.authorUzun, Gultekin
dc.contributor.authorÇalın, Recep
dc.contributor.authorSeker, Ulvi
dc.date.accessioned2020-06-25T18:07:20Z
dc.date.available2020-06-25T18:07:20Z
dc.date.issued2013
dc.departmentKırıkkale Üniversitesi
dc.descriptionUZUN, GULTEKIN/0000-0002-6820-8209; UZUN, GULTEKIN/0000-0002-6820-8209
dc.description.abstractIn this study, Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement-volume ratios were produced by melt-stirring and subjected to machining tests by carbide and coated carbide cutting tools. Machining tests were conducted with 150, 200, 250 and 300 m/min cutting speeds, 0.075, 0.15 and 0.225 mm/rpm feed rates and 1 mm depth of cut. Piezoelectric quartz crystal type dynamometer was used to measure cutting forces. As a result of the tests, it was observed that the increase in cutting speed first led to an increase and then a decrease in main cutting force values (Fc), and the increase in feed rate was accompanied with increased main cutting forces. The most consistent results in terms of Fc values were displayed by 10% MgO reinforced composites. While no abrasion occurred on the surfaces of cutting tools, build up edge formation was observed in the machining tests.en_US
dc.description.sponsorshipKirikkale UniversityKirikkale University; Gazi UniversityGazi Universityen_US
dc.description.sponsorshipThe authors are grateful to Kirikkale University and Gazi University for the support of this work.en_US
dc.identifier.citationBu makale açık erişimli değildir.en_US
dc.identifier.doi10.1515/secm-2012-0034
dc.identifier.endpage162en_US
dc.identifier.issn0792-1233
dc.identifier.issn2191-0359
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84879127004
dc.identifier.scopusqualityQ3
dc.identifier.startpage155en_US
dc.identifier.urihttps://doi.org/10.1515/secm-2012-0034
dc.identifier.urihttps://hdl.handle.net/20.500.12587/5546
dc.identifier.volume20en_US
dc.identifier.wosWOS:000318224100008
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofScience And Engineering Of Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcastingen_US
dc.subjectmachiningen_US
dc.subjectmetal matrix composites (MMCs)en_US
dc.subjectMgOen_US
dc.titleInvestigation of machinability in Al-MgO composites produced by melt-stirringen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Pul-2013-Investigation-of-machinability-in-a.pdf
Boyut:
1.67 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu