Effect of resin luting cement polymerisation mode and high powered polymerisation unit type on shear bond strength of leucite reinforced full ceramic system to dentine

Basit Öğe Kaydı
dc.contributor.authorNalcaci, A.
dc.contributor.authorUludag, B.
dc.contributor.authorSahin, V.
dc.date.accessioned2020-06-25T17:51:54Z
dc.date.available2020-06-25T17:51:54Z
dc.date.issued2011
dc.departmentKırıkkale Üniversitesi
dc.description.abstractThis in vitro study evaluated the effects of light polymerised (LP) and dual polymerised (DP) modes of a resin luting cement polymerised with different high powered polymerisation units on the shear bond strength of a leucite reinforced full ceramic system to dentine. Ceramic specimens (n=15) were bonded to dentine surfaces with a resin luting cement (Variolink II) in either LP or DP mode and polymerised according to one of four polymerisation profiles as follows: control group: 600 mW cm(-2) conventional halogen light, 40 s; light emitting diode polymerisation unit group: 1500 mW cm(-2) light emitting diode, 10 s; plasma arc curing (PAC) polymerisation unit 10 s group: 1370 mW cm(-2) PAC, 10 s; and PAC 3 s group: 1370 mW cm(-2) PAC, 3 s. Bond strength (MPa) data were analysed using two-way analysis of variance and Duncan's test (alpha=0.05). Polymerisation mode (p<0.01), type of light unit (p<0.01) and the interactions between the two were statistically significant (p<0.05). No significant differences were found between LP and DP modes except for the PAC 3 s group, in which the LP mode resulted in significantly lower shear bond strength values (10.43 +/- 1.02 MPa) compared with the DP mode (12.88 +/- 1.73 MPa).en_US
dc.description.sponsorshipIvoclar Vivadent Turkey; Demak Dis Malzemeleri Paz. Ve Dis, Tic. Ltd Sti.; Merkez Dis Malz. San. Ve Tic. Ltd Sti.en_US
dc.description.sponsorshipThe authors would like to thank Ivoclar Vivadent Turkey, Demak Dis Malzemeleri Paz. Ve Dis, Tic. Ltd Sti. and Merkez Dis Malz. San. Ve Tic. Ltd Sti. for their support in supplying the materials used in this study.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1179/143307511X12998222918660
dc.identifier.endpage95en_US
dc.identifier.issn1432-8917
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-79957452325
dc.identifier.scopusqualityQ2
dc.identifier.startpage91en_US
dc.identifier.urihttps://doi.org/10.1179/143307511X12998222918660
dc.identifier.urihttps://hdl.handle.net/20.500.12587/5022
dc.identifier.volume15en_US
dc.identifier.wosWOS:000290848000004
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherManey Publishingen_US
dc.relation.ispartofMaterials Research Innovations
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectResin luting cementen_US
dc.subjectPolymerisationen_US
dc.subjectShear bond strengthen_US
dc.subjectLeucite reinforced full ceramicen_US
dc.titleEffect of resin luting cement polymerisation mode and high powered polymerisation unit type on shear bond strength of leucite reinforced full ceramic system to dentineen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Effect of resin luting cement polymerisation mode and high powered polymerisation unit type on shear bond strength of leucite reinforced full ceramic system to dentine.pdf
Boyut:
268.11 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu