Design, Fabrication, and Characterization of a Water-Cooled Electromagnet and Magnetic Field Mapping
[ X ]
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Kırıkkale Üniversitesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Inthis paper, a prototype solenoid magnet was designed and fabricated to be usedin Micro Wave Discharge Ion Sources in the Turkish Accelerator Center ProtonAccelerator Project and magnetic field mapping was performed with an experimentand also investigation was conducted by using finite element method. For this,a water-cooled electromagnet was designed and fabricated from 1010 steel with athickness of 10 cm. Magnetic field sensor was connected to a new designedrobotic arm and 2570 magnetic field intensity measurements were performed inthe core of magnet with the size of 20 cm diameter and 10 cm depth of cylinder.The robotic arm was driven by three stepper motors and the measurement wasautomated with the Arduino physical programming platform. The UGN3503U HallEffect sensor was used to measure the magnetic field and for the dataprocessing ROOT was used. The magnetic field distribution inside the core of thesolenoid magnet was investigated by using the finite element method. The commercialversion of The Flexible Generalized Minimal Residual method (FGMRES) solver (built-inCOMSOL) was used for the numerical part and magnetic field was calculated andcompared with experiment to correlate simulation accuracy of this study.
Açıklama
Anahtar Kelimeler
solenoid magnet, finite element method, water-cooled magnet, robotic arm, Engineering, Mühendislik
Kaynak
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
1
Sayı
2-349
