Investigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix composites

Basit Öğe Kaydı
dc.contributor.authorPul, Muharrem
dc.date.accessioned2020-06-25T18:30:33Z
dc.date.available2020-06-25T18:30:33Z
dc.date.issued2019
dc.departmentKırıkkale Üniversitesi
dc.description.abstractIn this study, first Silicon Carbide (SiC) and Magnesium Oxide (MgO) powders of <= 105 micron particle size were mixed in equal amounts. Then, the powder mixture was reinforced by using vortex method in liquid Al2024 aluminum alloy in three different ratios (3%, 6% and 12%) to produce composites. Finally, on composite samples, machinability tests were carried out with a uniform cutting tool at constant cutting depth (1 mm) and dry cutting conditions. Three different cutting speeds (100, 150, 200 m min(-1)) and three different feed values (0.03; 0.06; 0.12 mm/rev) were used in the machining experiments. Machinability tests were performed on a Computer Numerically Controlled (CNC) lathe. Wear behavior of cutting tools were examined by using SEM microscope images. In all of the cutting tools, built-up edge (BUE) was observed while small amount of flank wear occurred. It was concluded that the selected cutting tool and cutting parameters maybe suitable for the machining of such composite materials.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1088/2053-1591/ab4093
dc.identifier.issn2053-1591
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85072727881
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.1088/2053-1591/ab4093
dc.identifier.urihttps://hdl.handle.net/20.500.12587/7676
dc.identifier.volume6en_US
dc.identifier.wosWOS:000485739500001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherIop Publishing Ltden_US
dc.relation.ispartofMaterials Research Express
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmetal matrix compositeen_US
dc.subjectAl2024en_US
dc.subjectSiCen_US
dc.subjectMgOen_US
dc.subjectmachiningen_US
dc.subjecttool wearen_US
dc.titleInvestigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix compositesen_US
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu