An Investigation of Abrasive Wear Behaviour of Al 2014-SiC Composites

Basit Öğe Kaydı
dc.contributor.authorÇalın, Recep
dc.contributor.authorCilasun, Niyazi Selcuk
dc.date.accessioned2020-06-25T18:13:25Z
dc.date.available2020-06-25T18:13:25Z
dc.date.issued2015
dc.departmentKırıkkale Üniversitesi
dc.description.abstractIn this study, the effects of SiC reinforcement volume fractions on hardness, porosity and abrasive wear behaviour were examined in Al 2014-SiC (<92.3 mu m) reinforced metal matrix composites (MMCs) of 3%, 6% and 12% reinforcement-volume (R-V) ratios produced by melt-stirring. Abrasive wear tests were carried out by 320 mesh Al2O3 abrasive paper and a pin-on-disc wear test apparatus, under 10N, 20N and 30N load, and at 0.2 ms(-1) sliding speed. The same specimens were tested by 150, 240 and 320 mesh abrasive paper at 0.2 ms(-1) sliding speed, under 10N, 20N and 30N load. After the tests, the microstructures of the worn surfaces were examined with scanning electron microscope (SEM) studies and EDS analyses. Besides, the amount of hardness and porosity of the specimens were identified. It was recorded that the amounts of hardness and porosity increases as the SiC reinforcement in the composite increases. The highest amount of abrasive wear was recorded in the specimens with 3% reinforcements. It was identified that the amount of abrasive wear decreases while the SiC reinforcement in the composite structure increases by volume, and that the amount of porosity and reinforcement volume (R-V) ratio are important parameters in abrasive wear.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1515/htmp-2014-0036
dc.identifier.endpage139en_US
dc.identifier.issn0334-6455
dc.identifier.issn2191-0324
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84926294170
dc.identifier.scopusqualityQ3
dc.identifier.startpage131en_US
dc.identifier.urihttps://doi.org/10.1515/htmp-2014-0036
dc.identifier.urihttps://hdl.handle.net/20.500.12587/6193
dc.identifier.volume34en_US
dc.identifier.wosWOS:000351665200004
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofHigh Temperature Materials And Processes
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmetal matrix compositeen_US
dc.subjectSiCen_US
dc.subjectabrasive wearen_US
dc.subjectscanning electron microscope (SEM)en_US
dc.titleAn Investigation of Abrasive Wear Behaviour of Al 2014-SiC Compositesen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Calin-2015-An-investigation-of-abrasive-wear-b.pdf
Boyut:
6.07 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu