The effect of cement raw mix waste dust on porcelain tile properties
Yükleniyor...
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Nowadays, the recycling of industrial waste is one of the priority issues. Recycling studies related with reducing the negative effects of wastes on the environment are becoming increasingly important. It was believed that nothing was beyond recycling, and manufacturers should take greater responsibility for their part in the waste economy to apply cyclical solutions to an expanding breadth of new product categories. Cement raw mix contains silicate, alumina, iron oxide, and limestone. Raw mix contains SiO2, Al2O3, CaO, Fe2O3, MgO, Na2O, and K2O in higher ratio. The high presence of these oxides in the raw mix powder makes raw powder an alternative source of raw material for porcelain tile compositions. In this study, raw mix dust was used instead of sodium feldspar in a standard porcelain tile composition, at a rate of 1, 5, 10, and 15% by weight. The specimens were sintered at 1210 A degrees C. Flexural strength, firing shrinkage, water absorption, porosity, and other technological properties were investigated. It has been determined that the body containing 1% of the raw mix powder improved its physical and mechanical properties compared to the standard body.
Açıklama
Anahtar Kelimeler
Cement raw mix, Porcelain tile, Recycling, Porosity
Kaynak
Journal Of The Australian Ceramic Society
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
55
Sayı
1
Künye
closedAccess
