Effects of shear strength variability on the peak and residual horizontal resistance of on-bottom subsea pipelines in clay

Basit Öğe Kaydı
dc.contributor.authorOzkul, Zeynep H.
dc.contributor.authorBirgoren, Burak
dc.date.accessioned2025-01-21T16:38:21Z
dc.date.available2025-01-21T16:38:21Z
dc.date.issued2023
dc.departmentKırıkkale Üniversitesi
dc.description.abstractSubsea production pipelines in deep water oil and gas fields are susceptible to a phenomenon called lateral buckling which is a major pipeline design concern. Accurate estimation of lateral buckle formation and the additional stresses generated are of particular importance for High-Temperature High-Pressure (HTHP) pipelines resting on soft clay and is the subject of pipe-soil interaction studies (PSI). Variability in pipe embedment and soil resistances constitute the largest uncertainty in PSI analyses. Best practice methods for PSI studies constitute multi-step strategies that involve finding solutions to nonlinear and implicit equations. In the present study, the impact of soil strength variability on embedment and subsequently peak (Hpeak/V) and residual (Hres/V) lateral friction factors are evaluated. An R code, PSI-Lateral, is developed and verified against published case studies. It is used to calculate the pipeline embedment and horizontal resistances mobilized in a parametric study on three pipe diameters (0.6, 0.8 m and 1.0 m) with three different wall thicknesses. For each pipe diameter-weight combination, embedment and lateral friction factors (peak and residual) are calculated for a series of mean shear strengths ranging from 2 kPa to 8 kPa and COV ranging from 5% to 37.5%. The high estimate and low estimate shear strengths, suHE and suLE, correspond to values that are +/- two standard deviations from the mean. Hence, the range of strengths encompassed between these two extremes represents approximately 95% of the shear strength distribution. The results of the parametric runs conducted are presented in the form of graphical charts where high and low embedment and lateral friction factors can be read-off for any selected pair of mean shear strength and COV. Similar trends are observed in the charts for all pipelines evaluated. It is found that the range of normalized embedment, z/D, increases with increasing COV and decreases with increasing mean shear strength for all pipelines tested. A similar trend is observed for the residual horizontal resistance. The expected range of peak horizontal resistance Hpeak/V shows the same trend but only for soils with mean strengths less than 4 kPa. For soils with higher mean strengths, the range of Hpeak/V is found to be mostly insensitive to variations in COV and further increases in the mean strength.
dc.identifier.doi10.1016/j.jestch.2023.101477
dc.identifier.issn2215-0986
dc.identifier.scopus2-s2.0-85166011743
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1016/j.jestch.2023.101477
dc.identifier.urihttps://hdl.handle.net/20.500.12587/24646
dc.identifier.volume45
dc.identifier.wosWOS:001147220900001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier - Division Reed Elsevier India Pvt Ltd
dc.relation.ispartofEngineering Science and Technology-An International Journal-Jestech
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectUndrained shear strength; Subsea pipelines; Peak lateral friction factor; Residual lateral friction factor; Coefficient of variation; R code
dc.titleEffects of shear strength variability on the peak and residual horizontal resistance of on-bottom subsea pipelines in clay
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu