Evaluation of the Effect of Different Abutment Materials on the Final Color of the Restoration After Aging: An In Vitro Study
Yükleniyor...
Dosyalar
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Quintessence Publishing Co Inc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
To compare the effect of thermomechanical aging on implant abutment color change when using different abutment backgrounds. Materials and Methods: In this study, three separate experimental groups (n = 10) with different implant abutment materials were used: zirconia, modified polyether ether ketone (MPEEK), and polyether ketone ketone (PEKK). Equal-sized glass-ceramic incisor crowns were cemented to the abutments using transparent dual-curing resin cement. The specimens were then subjected to the thermomechanical aging process for the clinical equivalent of 5 years of use. The color values of each specimen in the middle third and the incisal third were recorded by a digital spectrophotometer in the CIE L*a*b* color coordinates both before and after the aging process. Color differences between groups were compared using one-way analysis of variance (ANOVA), while Tukey test was used to compare differences within the groups (P = .05). Results: In terms of color change (Delta E00) values, the zirconia group was found to show statistically more color changes only in the middle third (P < .000), but there was no significant difference between the the MPEEK and PEKK groups. In all groups, the Delta E00 value was clinically acceptable (Delta E00 < 1.8). Conclusion: After the aging process, high-performance polymer abutments caused less color change than zirconia. Therefore, esthetically satisfying results can be obtained in the anterior region, especially when highly translucent crown materials are used.
Açıklama
25th Izmir Chamber of Dentists International Scientific Congress and Exhibition -- NOV, 2019 -- Izmir, TURKEY
Anahtar Kelimeler
Kaynak
International Journal of Prosthodontics
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
35
Sayı
5