Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3+TiCN mixed ceramic tool

Basit Öğe Kaydı
dc.contributor.authorAslan, Ersan
dc.contributor.authorCamuscu, Necip
dc.contributor.authorBirgoren, Burak
dc.date.accessioned2020-06-25T17:44:06Z
dc.date.available2020-06-25T17:44:06Z
dc.date.issued2007
dc.descriptionBirgoren, Burak/0000-0001-9045-6092
dc.description.abstractDue to their high hardness and wear resistance, Al2O3-based ceramics are one of the most suitable cutting tool materials for machining hardened steels. However, their high degree of brittleness usually leads to inconsistent results and sudden catastrophic failures. This necessitates a process optimization when machining hardened steels with Al2O3 based ceramic cutting tools. The present paper outlines an experimental study to achieve this by employing Taguchi techniques. Combined effects of three cutting parameters, namely cutting speed, feed rate and depth of cut on two performance measures, flank wear (VB) and surface roughness (R-a), were investigated employing an orthogonal array and the analysis of variance (ANOVA). Optimal cutting parameters for each performance measure were obtained; also the relationship between the parameters and the performance measures were determined using multiple linear regression. (c) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1016/j.matdes.2006.02.006
dc.identifier.endpage1622en_US
dc.identifier.issn0261-3069
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-33845186031
dc.identifier.scopusqualityQ1
dc.identifier.startpage1618en_US
dc.identifier.urihttps://doi.org10.1016/j.matdes.2006.02.006
dc.identifier.urihttps://hdl.handle.net/20.500.12587/4011
dc.identifier.volume28en_US
dc.identifier.wosWOS:000245047300021
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Design
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecthard turningen_US
dc.subjectTaguchi techniquesen_US
dc.subjectexperimental designen_US
dc.subjectanalysis of varianceen_US
dc.titleDesign optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3+TiCN mixed ceramic toolen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
1-s2.0-S0261306906000550-main.pdf
Boyut:
203.85 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu