Manufacture Of Medium Density Fiberboard (Mdf) Panels From Agribased Lignocellulosic Biomass
Yükleniyor...
Tarih
2017
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Slovak Forest Products Research Inst
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Lignocellulosics fibers and commercially-manufactured-chip (Pinus sylvestris L., Fagus orientalis and Quercus robur L.) with 11% moisture conten twere used for the experiment. The mixingratios of lignocellulosics fibers was 20% which is from okra and tobaccos talks, hazelnut and walnuts hell, and pinecone for each mixture in preformed panel and commercially manufactured-chip was 100 % for the control sample. A commercial ureaformaldehyde (UF) adhesive was used as a binder. The physical and mechanical properties such as density, thickness swelling (TS), bending strength (BS), modulus elasticity (MOE), internalbond (IB), screw holding ability (SHA) perpendicular to the plane of panel, Janka hardness perpendicular to the plane of panel properties of MDF were measured. The results indicated that all the panels met the general purpose-use requirements of TS-EN. Thus, our results suggest that biomass from different sources can be an alternative raw material for MDF manufacturing process.
Açıklama
Camlibel, Osman/0000-0002-8766-1316; ayata, umit/0000-0002-6787-7822
Anahtar Kelimeler
Lignocellulosic biomass, MDF, physical and mechanical properties
Kaynak
Wood Research
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
62
Sayı
4
Künye
closedAccess
