Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material

dc.contributor.authorAtsu, Saadet
dc.contributor.authorKeskin, Yasemin
dc.date.accessioned2020-06-25T18:07:09Z
dc.date.available2020-06-25T18:07:09Z
dc.date.issued2013
dc.departmentKırıkkale Üniversitesi
dc.descriptionKeskin, Yasemin/0000-0002-9550-9920
dc.description.abstractObjective: This study investigated the effects of different surface treatments on the tensile bond strength of an autopolymerizing silicone denture liner to a denture base material after thermocycling. Material and Methods: Fifty rectangular heat-polymerized acrylic resin (QC-20) specimens consisting of a set of 2 acrylic blocks were used in the tensile test. Specimens were divided into 5 test groups (n=10) according to the bonding surface treatment as follows: Group A, adhesive treatment (Ufi Gel P adhesive) (control); Group S, sandblasting using 50-mu m Al2O3; Group SCSIL, silica coating using 30-mu m Al2O3 modified by silica and silanized with silane agent (CoJet System); Group SCA, silica coating and adhesive application; Group SCSILA, silica coating, silane and adhesive treatment. The 2 PMMA blocks were placed into molds and the soft lining materials (Ufi Gel P) were packed into the space and polymerized. All specimens were thermocycled (5,000 cycles) before the tensile test. Bond strength data were analyzed using 1-way ANOVA and Duncan tests. Fracture surfaces were observed by scanning electron microscopy. X-ray photoelectron spectrometer (XPS) and Fourier Transform Infrared spectrometer (FTIR) analysis were used for the chemical analysis and a profilometer was used for the roughness of the sample surfaces. Results: The highest bond strength test value was observed for Group A (1.35 +/- 0.13); the lowest value was for Group S (0.28 +/- 0.07) and Group SCSIL (0.34 +/- 0.03). Mixed and cohesive type failures were seen in Group A, SCA and SCSILA. Group S and SCSIL showed the least silicone integrations and the roughest surfaces. Conclusion: Sandblasting, silica coating and silane surface treatments of the denture base resin did not increase the bond strength of the silicone based soft liner. However, in this study, the chemical analysis and surface profilometer provided interesting insights about the bonding mechanism between the denture base resin and silicone soft liner.en_US
dc.identifier.citationAtsü, S., & Keskın, Y. (2013). Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material. Journal of applied oral science : revista FOB, 21(4), 300–306.en_US
dc.identifier.doi10.1590/1678-775720130066
dc.identifier.endpage306en_US
dc.identifier.issn1678-7757
dc.identifier.issn1678-7765
dc.identifier.issue4en_US
dc.identifier.pmid24037067
dc.identifier.scopus2-s2.0-84883750677
dc.identifier.scopusqualityQ1
dc.identifier.startpage300en_US
dc.identifier.urihttps://doi.org/10.1590/1678-775720130066
dc.identifier.urihttps://hdl.handle.net/20.500.12587/5494
dc.identifier.volume21en_US
dc.identifier.wosWOS:000324571400002
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.indekslendigikaynakPubMed
dc.language.isoen
dc.publisherUniv Sao Paulo Fac Odontologia Bauruen_US
dc.relation.ispartofJournal Of Applied Oral Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectDenture basesen_US
dc.subjectDenture linersen_US
dc.subjectSurface propertiesen_US
dc.subjectTensile strengthen_US
dc.titleEffect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base materialen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material.pdf
Boyut:
885.08 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text