Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
[ X ]
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The combined effect of MWCNTs (multi-walled carbon nanotubes) and ENIAg (Electroless Nickel Immersion Silver) surface finish on the formation of interfacial microstructure and shear strength of the Sn-1.0Ag-0.5Cu (SAC105) solder was investigated in this study. Plain and composite solders (SAC-xCNT; x = 0, 0.01, 0.05 and 0.1 wt%) were successfully synthesized through the powder metallurgy route and afterwards soldered on the ENIAg surface finish and plain Cu substrates. Detailed analysis of the microstructure revealed the formation of the Cu6Sn5 IMC at the SAC solder/Cu substrate interface of the SAC-xCNT/Cu solder interconnects. Whereas, the Ni3Sn4 IMC and (Cu,Ni)(6)Sn-5 IMC appeared at the SAC solder/ENIAg substrate interface of the SAC-xCNT/ENIAg. The MWCNTs-reinforced SAC composite solder interconnects exhibited thinner interfacial IMC layer thicknesses relative to the plain counterparts for both substrates used. Given the prospects of the ENIAg as a reliable surface finish material, the SAC-xCNT/ENIAg exhibited IMC thickness values within the range of 2.98-2.65 mu m as compared to the 5.23-3.61 mu m demonstrated by the SAC-xCNT/Cu. Overall, the strengthening capacity of the MWCNTs was well-defined in both sample grades, with the SAC-0.05CNT/Cu and SAC-0.05CNT/ENIAg exhibiting the highest shear strength values of 10.23 MPa and 11.14 MPa, respectively.
Açıklama
Anahtar Kelimeler
Kaynak
Journal of Materials Science-Materials In Electronics
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
33
Sayı
10
