Mechanical And Physical Properties Of Medium Density Fibreboard With Calcite Additive

Basit Öğe Kaydı
dc.contributor.authorCamlibel, Osman
dc.contributor.authorAkgul, Mehmet
dc.date.accessioned2021-01-14T18:11:05Z
dc.date.available2021-01-14T18:11:05Z
dc.date.issued2020
dc.departmentKKÜ
dc.description.abstractIn this study, it is investigated that are calcite filler can be used in the production of medium density fiberboard. Chips have been to the process of cooking for 4-5 minutes in Asplund defibrator with the vapor pressure of 7-7.5 bar, and 1800C temperature. 1.5% paraffin and 1% ammonium sulphate to be pulverized is added to fibers on the output of defibrillator and blowline line. Calcite fillers are prepared in a separate tank in order to use calcite instead of lignocellulosic fibers in the production of 1 m(3) MDF. After that, urea formaldehyde glue is prepared as three different solutions which include the calcite, respectively with 3% (20 kgm(-3)), 6% (40 kg-m(-3)), 9% (60 kg-m(-3)). The fibers are dried to moisture of 8%-12%. This press applies temperature about 185-190 degrees C and pressure about 32-34 kg-m(-2) to the mixture material for 270 seconds during pressing time. MDF panels (2100 x 4900 x 18 mm) were produced in the process. Both mechanical and physical experiments are performed on boards which are produced.en_US
dc.description.sponsorshipT.C. Ministry of Science Industry and Technology, Duzce University; Divapan Integrated Wood Company [San-Tez 00653.STZ.2010-2]; Division of Wood Chemistry and Technology Department in Faculty of Forestry at Duzce Universityen_US
dc.description.sponsorshipThis study was supported by T.C. Ministry of Science Industry and Technology, Duzce University, and Divapan Integrated Wood Company as the project of San-Tez 00653.STZ.2010-2. The authors would like to acknowledge Division of Wood Chemistry and Technology Department in Faculty of Forestry at Duzce University for their help and support.en_US
dc.identifier.citationBu makale açık erişimli değildir.en_US
dc.identifier.endpage244en_US
dc.identifier.issn1336-4561
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85084914782
dc.identifier.scopusqualityQ2
dc.identifier.startpage231en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12587/12878
dc.identifier.volume65en_US
dc.identifier.wosWOS:000530092600005
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSLOVAK FOREST PRODUCTS RESEARCH INSTen_US
dc.relation.ispartofWOOD RESEARCH
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMDFen_US
dc.subjectfiberboarden_US
dc.subjectcalcite filleren_US
dc.subjectphysical propertiesen_US
dc.subjectmechanical propertiesen_US
dc.titleMechanical And Physical Properties Of Medium Density Fibreboard With Calcite Additiveen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
MECHANICALANDPHYSICALPROPERTIES.pdf
Boyut:
637.09 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu